Traversing Walls



Traversing walls are a great way to convert a plain wall into an exciting opportunity. 
 
Our traverse wall incorporates holds and fixings fitted to an existing solid internal or external wall. 

We will install up to 3 rows of foot holds and up to 3 rows of handholds. 
Footholds do not exceed 600mm from the ground or floor so no safety surfacing is required. 
The top row of handholds is 1800mm from the ground with a 600mm gap between the top row of 

footholds and bottom row of handholds to prevent the wall being used for climbing. 
We can also paint the wall with non slip climbing paint to improve the look and feel.
 
Features:
- High grip holds in a wide range of colours, sizes and shapes 

- Expansion anchor and fitting tool (resin anchors for soft or hollow brick walls are available as an option) 
- Bolt and special hex head key 
- Holds and fixings for 1 linear metre of wall can have either 12, 15 or 18 holds 

  (12 = 2 rows of hand and foot holds, 15 = 3 rows of hand holds and 2 rows of foot holds, 

  18 =  3 rows of hand and foot holds)


























Contact us further further advice, information or to request a quotation:



Tel: 01295 760192 | Fax: 01295 768092 | e-mail: sales@olympicgymnasium.com

Traversing Wall Panels



Traversing wall panel, 2.4m height x 1.2m width, which can be installed onto a solid structure 

(eg a wall or fence) inside or outside to provide a solid flat plane for fixing holds where individual fixings 

are not possible. 
 
The panels are weatherproof and coated with a non slip surface and have 3 rows of foot holds and 3 rows 

of handholds. Footholds do not exceed 600mm from the bottom of the panel so no safety surfacing is 

required and the top row of handholds is 1800mm from the bottom of the panel. There is a 600mm gap 

between the top row of footholds and bottom row of handholds to prevent the wall being used for climbing.
 
Panels can be painted to make them more colourful and the top edge cut to form a wave or whatever shape 

may be required.
 
Features:
- High grip holds in a wide range of colours, sizes and shapes, Club 2 range (other shapes such as alphabet or 

  numbers available as an option) 
- 2.4m x 1.2m plywood panel with a high grip polyester coating and BZP fixings at 12/m2 (stainless steel fixings 

  and marine ply are available as an option for exterior use) 
- Bolts and special hex head key 


Contact us further further advice, information or to request a quotation:



Tel: 01295 760192 | Fax: 01295 768092 | e-mail: sales@olympicgymnasium.com

Traversing Wall Holds



Traversing wall holds are available in a wide range of shapes, colours and sizes, including stone shapes

plus alphabet and number sets.



All feature a moulded resin hold with a highgrip surface and bolt hole (2 on larger holds to stop them turning). 

These holds feature an internal safety device which holds the unit together in the unlikely event of one 

cracking around the bolt fixing (if overtightened) which stops the 2 halves breaking off and falling and 

possibly injuring someone.



It is important not to overtighten holds and the special T bar hex key helps ensure they are not overtightened.


Different colours or designs can be used to set special challenges, such as traversing across

the wall using one particular colour, specific letters or numbers.



















Contact us further further advice, information or to request a quotation:



Tel: 01295 760192 | Fax: 01295 768092 | e-mail: sales@olympicgymnasium.com